 |
- Dissipates RAM heat improving its performance.
- Easily instals with the provided spring clips.
- High conductivity thermal pad.
- Compatible with all standard SDR / DDR SDRAM modules.
- Avoid system crashes by RAM overheat.
- Efficient size fits on all motherboards without compomising the limited space.
- Available in aluminum and copper.
|
 |
|
 |
Memory Coolers create a high-conductivity thermal pad, enabling your high-speed memory to operate at peak performance. Crafted of aluminum with an anodized finish.
Align The Cooler Sides
Align your memory stick so it will be sandwiched between the two cooler sides.
NOTE : The connecting edge of the memory stick should be oriented upward, as down.
Remove the adhesive strip backing from the insides of the coolers.
The adhesive strip is on the INSIDE of the cooler sides. |
|
 |
Connect The Cooler Sides
Before seating the memory into the cooler and applying the adhesive, connect the tabs on
the bottom edges of the cooler sides. |
|
 |
Seat The Memory
The Memory Coolers have troughs along the bottom edge. Your memory stick should be positioned
so the non-connecting edges sits in these troughs. When the memory stick is properly seated,
you can close the cooling sides and apply the adhesive. |
|
 |
Snap On The Clips
Secure the cooler sides by snapping the clips in place as shown.
Be sure the move the clips up onto the sides of the coolers until they snap into place. |
|
